HP Switche
Aus d0b
Version vom 10. Oktober 2014, 22:51 Uhr von Sysd0b (Diskussion | Beiträge) (→HP Pro Curve 2610-48 (J9088A))
Inhaltsverzeichnis
HP Pro Curve 2610-48 (J9088A)
Terminal Settings
- Symbolrate von 1200 bis 115200 (default 9600)
- 8 data bits
- 1 stop bit
- no parity
- flow control set to Xon/Xoff
screen /dev/cu.usbserial 9600,cs8,-parenb,-cstopb,-clocal
Firmware
copy flash tftp <ip-adress-tftps> <filename> // Aktuelle Firmware auf den tftp schieben copy tftp flash <ip-adress-tftps> <filename> <primary|secondary> // Neue Firmware vom tftp holen
Befehlssammlung
Ein paar Schnipsel
show version show flash show config show running-config show config status