HP Switche: Unterschied zwischen den Versionen
Aus d0b
Zur Navigation springenZur Suche springenSysd0b (Diskussion | Beiträge) (→OID`s) |
Sysd0b (Diskussion | Beiträge) (→OID`s) |
||
Zeile 73: | Zeile 73: | ||
| [http://www.oidview.com/mibs/11/SEMI-MIB.html SEMI-MIB (HP)] || || .1.3.6.1.4.1.11 || || - | | [http://www.oidview.com/mibs/11/SEMI-MIB.html SEMI-MIB (HP)] || || .1.3.6.1.4.1.11 || || - | ||
|- | |- | ||
− | | System IP Address || hpHttpMgEntityNetInfoIPAddress || .1.3.6.1.4.1.11.2.36.1.1.3.1.1.7.1 || OctetString || " | + | | System IP Address || hpHttpMgEntityNetInfoIPAddress || .1.3.6.1.4.1.11.2.36.1.1.3.1.1.7.1 || OctetString || "192.168.23.23" |
|- | |- | ||
| HP Global Unique ID || hpHttpMgDeviceGlobalUniqueID || .1.3.6.1.4.1.11.2.36.1.1.5.1.1.2.1 || OctetString || "HPJ9088ACN821*****" | | HP Global Unique ID || hpHttpMgDeviceGlobalUniqueID || .1.3.6.1.4.1.11.2.36.1.1.5.1.1.2.1 || OctetString || "HPJ9088ACN821*****" | ||
|} | |} |
Version vom 13. Oktober 2014, 01:35 Uhr
Inhaltsverzeichnis
HP Pro Curve 2610-48 (J9088A)
Terminal Settings
- Symbolrate von 1200 bis 115200 (default 9600)
- 8 data bits
- 1 stop bit
- no parity
- flow control set to Xon/Xoff
screen /dev/cu.usbserial 9600,cs8,-parenb,-cstopb,-clocal
Firmware
copy flash tftp <ip-adress-tftps> <filename> // Aktuelle Firmware auf den tftp schieben copy tftp flash <ip-adress-tftps> <filename> <primary|secondary> // Neue Firmware vom tftp holen
Befehlssammlung
Ein paar Schnipsel
show version show flash show config show running-config show config status
SNMP
OID`s
Description | Name | OID | Type | Value (Example) |
MIB-2 | .1.3.6.1.2.1 | - | ||
System | .1.3.6.1.2.1.1 | - | ||
System description | sysDescr.0 | .1.3.6.1.2.1.1.1.0 | OctetString | ""ProCurve J9088A Switch 2610-48...." |
System uptime | sysUpTime.0 | .1.3.6.1.2.1.1.3.0 | TimeTicks | "Timeticks: (9400662) 1 day, 2:06:46.62" |
System contact | sysContact.0 | .1.3.6.1.2.1.1.4.0 | OctetString | "your@email.tld" |
System name | sysName.0 | .1.3.6.1.2.1.1.5.0 | OctetString | "switch_23" |
System location | sysLocation.0 | .1.3.6.1.2.1.1.6.0 | OctetString | "Rack 3" |
Interfaces | .1.3.6.1.2.1.2 | - | ||
IP | .1.3.6.1.2.1.4 | - | ||
ICMP | .1.3.6.1.2.1.5 | - | ||
TCP | .1.3.6.1.2.1.6 | - | ||
UDP | .1.3.6.1.2.1.7 | - | ||
SNMP | .1.3.6.1.2.1.11 | - | ||
Enity MIB | .1.3.6.1.2.1.47 | - | ||
Firmware Version (primary) | entPhysicalFirmwareRev | .1.3.6.1.2.1.47.1.1.1.1.10.1 | OctetString | "R.11.107" |
Firmware Version (secondary) | entPhysicalFirmwareRev | .1.3.6.1.2.1.47.1.1.1.1.9.1 | OctetString | "R.10.06" |
Serial Number | entPhysicalSerialNum | .1.3.6.1.2.1.47.1.1.1.1.11.1 | OctetString | "CN821****" |
System Mac | entLogicalTAddress | .1.3.6.1.2.1.47.1.2.1.1.5.1 | OctetString | "aa-bb-cc-dd" |
SEMI-MIB (HP) | .1.3.6.1.4.1.11 | - | ||
System IP Address | hpHttpMgEntityNetInfoIPAddress | .1.3.6.1.4.1.11.2.36.1.1.3.1.1.7.1 | OctetString | "192.168.23.23" |
HP Global Unique ID | hpHttpMgDeviceGlobalUniqueID | .1.3.6.1.4.1.11.2.36.1.1.5.1.1.2.1 | OctetString | "HPJ9088ACN821*****" |